Controlled access
Routes and standoff positions selected with site safety responsibilities in mind.
Power and utility inspection
Robotic inspection for distributed electrical and utility assets.
Use ground or overhead HYVIS access with visual, thermal and environmental sensing around configured switchgear, substations, generation facilities and utility corridors.
Representative application environment
Final platform, route and sensing configuration are site validated.
The inspection challenge
Bring consistent evidence to assets where access, safety and consequence matter.
Electrical assets may be distributed across controlled rooms, outdoor compounds and utility tunnels. The inspection method must respect approach limits, site procedures and the exact evidence required by the responsible electrical team.
Equipment evidence
Configured meter, indicator, switch-state and visible-condition capture.
Thermal context
Apparent surface-temperature patterns recorded for authorised review.
Application workflow
From site route to reviewable evidence.
The technology is selected after the inspection target and operating process are understood. Each stage creates an input for the next decision.
- 01
Define safe boundaries
Document permitted routes, equipment approach limits and escalation responsibilities.
- 02
Select critical targets
Register the panels, meters, indicators and thermal viewpoints required by the inspection plan.
- 03
Capture repeatably
Run configured missions from positions that produce comparable evidence.
- 04
Escalate with context
Present the finding together with the source image, reading, asset and mission record.
Evidence the workflow can produce
- Meter and indicator observations
- Visible equipment-state records
- Apparent thermal comparisons
- Environmental context and mission history
Representative operating environments
Switchgear roomsSubstationsGeneration facilitiesUtility tunnelsElectrical distribution corridors
Validation note
HYVIS does not replace electrical safety procedures or authorised judgement. Route safety, sensor standoff and review criteria must be approved and pilot-validated for the facility.
Application questions
What buyers usually need to confirm.
Can HYVIS operate near high-voltage equipment?
A proposed route must be reviewed against the facility's electrical safety rules, approach limits and authorised operating procedure before validation.
Can it read analogue and digital meters?
Selected meter types can be configured when the camera angle, distance, lighting and display variation provide suitable evidence.
Does a thermal finding prove a fault?
No. Thermal evidence supports authorised review; it does not by itself establish root cause or replace diagnostic procedures.
Site-specific assessment